A 100hp heavy-duty driveline operating at 1000rpm fitted with three rotors with three blades operating at over 80 metres per second as standard give effortless cutting power in intense working conditions.
A delta style construction allows for a smooth throughout of material in and out of the machine combined with a floating linkage to leave a perfect working image even in very rough terrain. Rapid in field cutting height is changed by adjusting each of the four wheel arms on the machine which each feature a heavy duty industrial wheel and tyre.
Specifications:
| Machine weight: | 1875kg (4134lbs) |
| Hitch: | Category 2 with floating clevis top link |
| Cutting width: | 4.45m (14′ 7″) |
| Overall width: | 4.71m (15′ 6″) |
| Overall length: | 3.62m (11′ 11″) |
| Deck height: | 0.73m (2′ 5″) |
| Cutting height: | 25mm – 400mm (1″ – 1′ 4″) |
| Cutting capacity: | 100mm (4″) |
| Recommended tractor HP: | 80hp (60kW) |
| Power take-off speed: | 1000rpm |
| Gearbox: | Cast iron housing |
| Input shaft: | 1 3/8″ Z6 input shaft |
| Gearbox lubricant: | Lithium EP000 semi fluid grease |
| Gearbox oil capacity [splitter gearbox]: | 4.3 litres (7.6 pints) |
| Gearbox oil capacity [rotor gearboxes (x2)]: | TBC |
| Deck construction: | All welded construction |
| Deck material thickness: | 4mm (3/16″) |
| Side skirt material thickness: | 6mm (1/4″) |
| Anti-scalp dish: | 5mm (3/16″) round pan with blade holder bar |
| Blades (x6): | 10mm (3/8″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction |
| Blade bolts: | M24 C/W shank grade 8.8 |
| Blade tip speed: | 75 m/s (14764 fpm) |
| Driveline: | ASAE Category 5 |
| Driveline protection: | Overrun clutch on input PTO shaft and 2-plate slip clutches on wing driveshafts |
| Tailwheel mount assembly: | Welded box section arm and caster fork with 360 degree swivel |
| Tailwheel: | 5.00-8 rubber tyre with steel hub |
| Front guard: | Single, two-piece chain guard |
| Rear guard: | Single chain guard |
** Underside of deck to skid
