Your Quote Request

Agriculture Equipment Shop

  • ST424 VibeSpike-Seeder

    Overseeding grass is important to keep it strong and resistant against all kinds of outside threats. Regular overseeding keeps your grass green and healthy. MAREDO designed an efficient solution for overseeding or interseeding small, medium and large areas: The MAREDO ST424 VibeSpike-Seeder. The ST424 is a dimple seeder which will plant the seed. A shaft with vibratory spike sections will produce a pattern of dimples. Right behind the spikes the seeds will be drop accurately by the dosing shaft. The seed will be 'planted' in the holes, helping to protect it against the weather and birds and ready to germinate. The large diameter rear roller will help closing the slits and will also drive the seed dosing system. Changing gears help setting the right dosage needed.

  • ST418 VibeDisc-Seeder

    Overseeding grass is important to keep it strong and resistant against all kinds of outside threats. Regular overseeding keeps your grass green and healthy. MAREDO designed an efficient solution for overseeding or interseeding small, medium and large areas: The MAREDO ST418 VibeDisc-Seeder. The ST418 is a slit seeder which will plant the seed. A shaft with vibratory discs will produce a pattern of pre-cut slits. Right behind these discs, V-shaped round discs will open the pre-cut slit right at the position where the seeds drop. The seed will be 'planted' in the slit making it protected against the weather and birds and ready to germinate. The large diameter rear roller will help closing the slits and will also drive the seed dosing system. Changing gears help setting the right dosage needed.

  • ST230 HighSpeed-Corer

    It is important to keep the organic material layer in the rootzone of Turf under control. Too much organic matter can make the Turf unhealthy and will increase the risk of diseases. With the ST230 Highspeed-Corer it is easy to remove organic material up to 75 mm/ 3″ The ST230 is very non destructive to the plants and the surface. When connected to the STrac 700, the ST230 is a fast and light weight solution to remove organic matter in a clean way. The unique suspension of the tines put minimal stress on the edges op the produces holes. Ideal for weaker Turf areas. The available tine selection for the ST230 offer a range of hollow, solid and cross tines. Ideal for all circumstances all year round.  

  • ST210 VibeSpike-Aerator

    Grass and roots need Oxygen. Regular aeration is important to get this Oxygen right to the part of the grass where it needs it most: at the roots. MAREDO found a quick and efficient way to aerate grass and designed the MAREDO MT210 VibeSpike-Aerator. The unique system of vibratory spike sections helps reaching a working depth up to 60 mm./2.4'' The vibrating spikes will also relieve soil compaction and help stimulate healthy grass growth.

  • ST200 Flex-Verticutter

    The MAREDO ST200 Flex-Verticutter offers proved quality and technology as a single and compact unit. Great cutting quality and good grass recovery are key-words. The Carbide tipped blades will remove a lot of material and will leave well-cut slits. The reverse rotating blades will spread all material even across the surface.

  • ST170 FlexFraze-Mower

    Fraze-Mowing, Fraise-Mowing or sometimes called Turf stripping is a great method to remove the top surface of grass area. The only things that are left behind are roots, the crowns of the grass plants and a perfect flat surface. Ideal for overseeding or re-sodding. Fraze-Mowing machines however were only available in large size behind tractors. This was until MAREDO introduced the ST170 FlexFraze-Mower. A compact ST head that will remove the top surface leaving a smooth and flat surface ready to overseed. With the ST170 it now is possible to convert troubled grass areas into new and healthy grass carpets.

  • ST160 CleanCut-SandFiller

    The profile or build up of the toplayer on greens is very important. To much organic matter or too less sand can have influence on the resistance against diseases. The ST160 CleanCut-SandFiller is a great tool to increase the percentage of sand in the top layer. By cutting clean cuts the sand will reach a depth up to 25 mm / 1” As it makes clean cuts there is no need to remove organic material afterwards. The green can be rolled and the game can continue.

  • ST120 Flex-SodCutter

    Sod cutting is a great method to remove Turf in a very clean and efficient way. Most sod cutters rely on weight and brute force to cut sods. The MAREDO ST120 Flex-SodCutter is designed differently. The counter balanced cutting blade is cutting smooth through even the most toughest Turf. The vibratory knife runs at a high RPM while the counter balance reduced the vibrations in the machine to a minimum. When the ST120 is connected to the STrac 700 or STrac 720 it is very easy to cut sods without having to push or pull heavily on the machine. Easy to operate and clean cutting. It is possible to completely cut an area clean without leaving lines thanks to the floating head suspension. Sod cutting has never been this easy.

  • STrac 720

    Following the huge succes of the STrac 700, MAREDO introduces the STrac 720. Same design and high quality but now with an electric start and more horsepower. The Honda produces 12.5 Hp making it even more powerfull than the STrac 700.

  • STrac 700

    Where multiple treatments needed to be done to maintain turf in small, medium, and larger areas, multiple machines always needed to be available. This was before MAREDO introduced one machine that could execute all these maintenance jobs: The MAREDO STrac 700. The STrac 700 is a multifunctional tool carrier. The STrac 700 can carry one MAREDO ST head. Each ST head offers a unique solution for turf maintenance such as aeration, verticutting, overseeding and turf stripping. ST heads can easily be interchanged on the STrac 700 without tools. Also see the STrac 720.

  • Dingo Mini Loader – K9PW

    The Dingo Mini Loader - K9PW, meticulously designed and manufactured by Dingo Australia, features a cutting-edge EFI petrol engine, ensuring it's the go-to choice for worksites, owner-operators, and DIY enthusiasts. WHAT YOU GET 23HP Petrol, Wheel Mini Loader All wheel drive 325kg Lift capacity 1,840mm lift The ORIGINAL iconic DiNGO Mini Loader Designed and manufactured in Australia

  • DINGO MINI LOADER – K9PT

    The innovative Dingo Mini Loader - K9PT, is a robust 23HP petrol-powered track machine that redefines durability and versatility on the job site. WHAT YOU GET 23HP Petrol, Track Mini Loader 325kg Lift capacity 1,835mm Lift Height Enhanced Traction and Versatility The ORIGINAL and iconic DiNGO Brand Designed and manufactured in Australia

No more Posts to load.

No more Posts to load.